network cabling, installations

Your First Conversation with a Cabling Installation Company

26 Feb 2018

network cabling, installationsNow that your business is ready to install new cabling or perform an upgrade, you will be meeting with a cabling installation company that has been vetted to discuss the project. Typically, the contractor will ask several standard questions to gain a good understanding of the project and make an evaluation. The questions are organized under topics and discussed in the paragraphs below.



Moving


When does your business plan to move? If the move is in the next two months, have arrangements been made for the phone or T1 lines with the telecommunications provider?


Although this is a key component when moving an office, many companies neglect it. Some telecoms need a 45-day notice for a T1 installation, so your move must take this into account.



Voice and Data Drops


What will be the number of voice and data drops required? A drop is a cable run usually starting from a server room or wiring closet and terminating at a cubicle, workstation, or office. Keep in mind that each station will typically require a drop for each computer and telephone line. Drops will also be needed for office equipment such as fax machines and network printers.



Construction


What kind of construction was done at the new office location? Does it have a hard cap ceiling, which most houses have, or a drop/acoustic ceiling? Facilitating access for running cables, drop ceilings are far easier than hard cap ceilings for installations, modifications, and upgrades.



Cabling Type


Is plenum or non-plenum cabling needed at the new office location? When cabling has to run over a ceiling where the space is already utilized for a HVAC (heating, ventilation, and air conditioning) system, then plenum-rated cable will be required because of its fire retardant and smoke-limiting capabilities. Plenum is a bit more expensive, but required to comply with code.



Phone System


Will the current phone system be transferred to the new office? The cabling installation company may not be capable of handling the type your business is using, therefore a subcontractor may be retained to handle this aspect of the project as it requires specialization.



Progressive Office Cabling


Founded in 1986, Progressive Office’s success has been a direct result of years of commitment to seeking solutions on behalf of our clients in the Washington, D.C. and New York City areas. Efficiently working together, Progressive teams get cabling installed and operating as fast as possible while minimizing disruption and downtime. Call our toll free number (800) 614-4560 today.

Network Cat5 Cat6

Drop or Dropped Ceiling

23 Dec 2009
 Network Cat5 ,Cat6A drop or dropped ceiling is the ceiling that is hung below the main (structural) ceiling. It may also be referred to as a false or suspended ceiling, and is a staple of modern construction and architecture. The area above the dropped ceiling is called the plenum space, as it is usually used for the HVAC air return. The plenum space is also very commonly used to conceal piping, wiring, and ductwork.

A typical dropped ceiling consists of a grid-work of metal channels in the shape of an upside-down "T", suspended from wires from the overhead concrete structure. These channels snap together in a pattern – typically a 2' x 2' or 2' x 4' grid. Each cell is filled with a lightweight "tile" or "panel" which simply drop into the grid. Tiles can be selected from a variety of materials, including wood, metal, plastic, or mineral fibres, and can come in almost any color. Light fixtures, HVAC air grilles, and other fixtures are available which can fit the same space as a tile. Most tile material is easily cut to allow fixtures in other shapes, such as incandescent lights, speakers, and fire sprinkler heads.

The suspended ceiling was originally developed to conceal the underside of the floor above and to offer acoustic balance and control in a room. The acoustic performance of suspended ceilings has improved dramatically over the years, with enhanced sound absorption and attenuation. This is sometimes achieved by adding insulation known as Sound Attenuation Batts (SABs), more commonly referred to as "sound batts", above the panels to help deaden sounds and keep adjacent rooms quieter.