Tag Archives: New York City

It is common sense that a business should install its cabling properly the first time. One way to ensure this is by working with experienced professionals during the planning stage. The following will discuss why getting your cabling right from the beginning will benefit your business.

Structured cabling delivers reliable high performance while providing flexibility, lowering maintenance costs, and enabling future expansion. The following will discuss in greater detail why structured cabling infrastructure is important for your business.

Part 4 will cover Fiber Cable to the Apartment or Office.

Part 3 will cover the three methods – blowing, pulling, and pushing – for getting fiber cables from the basement to each floor as well as troubleshooting.

Blowing

Although blown fiber is a proven method, it may not always be best for an in-building deployment. Using a gas-powered compressor in the basement may not be appropriate. A developer may not permit the use of compressed air, which can carry water and dirt into buildings. However, blowing has the advantage of distance. Due to the fact blown fiber can have an installation distance up to 3,000 feet, it may be the only practical option for some high-rise buildings.

 

Pulling

Perhaps the biggest advantage of pullable cable is cost. This method needs a minimum of additional equipment and has been tried and tested in most regions. Unfortunately, it is labor-intensive unless there is already a pull cord. There are installation teams that prefer the cable-rodding approach, but there is a chance of overstressing the fiber optic cable. When tensile load becomes excessive during pulling, it can potentially damage the cable, along with objects along the cable’s path. Pulling has a maximum installation up to 1,500 feet.

 

Pushing

Affordable pushing equipment allows cables to be pushed a maximum of 984 feet. If fiber optic cable is pushed with pre-termination, the process is efficient and fast. However, hand-pushing cable is not as fast as the two other methods. In addition, fiber cable can only be pushed a maximum of 325 feet. Moreover, an older building might have poorly planned or congested conduits, making pushing cable more difficult.

 

Troubleshooting

In some older buildings, only PVC electrical conduits may have been installed. Conduits may also already be pre-populated with other kinds of infrastructure. Even though well-designed microduct paths may let a maximum of 325 feet of fiber cable to be pulled and/or pushed through them, a poorly planned or congested conduit may only be able to accommodate just 50 feet of cable inside it.

 

Part 4 will cover Fiber Cable to the Apartment or Office.

 

Progressive Office Cabling

Founded in 1986, Progressive Office’s success has been a direct result of years of commitment to seeking cost-effective solutions. Working together, Progressive teams are committed to getting your data cabling, access control, and telecom systems installed and operating while minimizing disruption and downtime. Call our toll free number (800) 614-4560 today.

Part 2 will cover Taking Fiber Inside and Fiber to the Floor.

Installing fiber optic cable instead of copper wire for certain applications has advantages that are well known. Fiber can transmit a larger amount of data faster and over greater distances than copper, losing only minor signal strength over 100 meters. In addition, fiber has a longer service life than copper and requires little maintenance.

The creation of a campus network may be quite complex. Experts state that selecting the proper cabling, pathways, and hardware for the setup of the network is key. Part 2 will cover Connecting Fiber Between Buildings, Cabling & Pathways, and Hardware Connections.

Businesses with FTTB (Fiber to the Building) have a direct fiber optical connection to the Internet backbone. This allows them to utilize digital technologies and applications now and in the future.