Structured Cabling,,Office Cabling.connectors

How Improper Cabling Causes Network Issues – Part 2

12 Sep 2018

Structured Cabling Office Cabling Atlanta GAAs discussed in Part 1, the performance issues of your company’s network may be directly related to improper cabling. Part 2 will discuss Compatibility, Patch Cords, and Poor Installation.



Compatibility


Issues occasionally arise when coupling cabling and connectivity from various manufacturers. The use of jacks from one manufacturer with cabling from another, and then patch panels from a third firm is an example. This combination may result in compatibility problems. When components that are not intended by design to function together are used, network performance issues will likely result.


Purchasing top of the line high-performance cables, while utilizing lower-quality connectivity components, will produce a weak link in the chain. Cable of the highest quality will be unable to attain its full performance potential when it is married to jacks, patch panels, and plugs that are not rated to support its capabilities.



Patch Cords


Patch cords may be the top reason why there are issues in network performance.


Your company may have installed a high performance cabling infrastructure of the highest quality, but if low-quality patch cords were purchased to economize, network speed, signal quality, and overall performance will be compromised.



Poor Installation


Vetting the cabling services team you hire is perhaps the most important factor in the prevention of network performance issues. Check that the company you are considering has technicians that are properly trained and certified to install the cabling system you have chosen.


When cable installers are not properly trained, it will greatly increase the probability that your company’s structured cabling system will not be properly installed. Incompetent installation can result in problems such as improper pulling, excessive bending, and cable being installed too near sources of signal interference like large motors and machinery.


Poorly trained technicians will leave cabling that is not properly terminated or correctly polished. Sloppy work and insufficient attention to detail during installation will usually result in poor network performance, along with costly and time-consuming efforts to address the problems the substandard work caused.



Progressive Office Cabling


Founded in 1986, Progressive Office’s success has been a direct result of years of commitment to seeking solutions on behalf of our clients in the Washington, D.C. and New York City areas. Efficiently working together, Progressive teams get cabling installed and operating as fast as possible while minimizing disruption and downtime. Call our toll free number (800) 614-4560 today.

Network Cabling Structured Cabling

Are you Ready for 2gb Internet?

13 Jun 2015

Your city might be poised for a dramatic increase in Internet speed into your office. Right now, you might have DSL Internet running on Cat5e cable at speeds of up to 25 - 30mb. But 2gb Internet is coming. New high-speed fiber optic networks are being built that will bring 2gb Internet to your office's network. It's coming.



So, are you ready for it?



The answer to that question lies primarily in the cabling that exists in your office. Most offices in the US have Cat5e cabling. Cat5e is not even fully capable of handling 1gb speeds and will likely create speed issues at the desktop as users demand more bandwidth from advanced online and desktop applications. Cat5 cable is even slower. So, you will first need to figure out what kind of cable you have. The best way to do this is to look at the cable. Go to you wall closet or server room and look behind the patch panel. The patch panel looks like this.


And behind the panel is a bundle of cables. These cables have writing on them that describe the type of cable.That might look like this.





You should be able to see printed right on the cable the words "CATEGORY 5" or "CATEGORY 5E". If it says, "CATEGORY 6" or "CATEGORY 6A" than you are fine. Otherwise, you have cable that will not fully support 2gb Internet speeds into your office. Cat6/6A cabling is designed for 2gb and higher throughputs of data.


But getting ready for 2gb Internet is not just about the cable. You need the right cable and you also need the Cat6 compatible connectors, patch panels and a faster switch too. So, now you have a big decision to make.




The Big Decision


What should you do? Recabling an office is a big deal. It's disruptive and it's expensive. But, wait. Is it really such a big expense and does it need to be disruptive? The cost of installing Cat6 cabling in an office is about $175 - $250 per drop. Each computer will need one drop. And you might have a few printers on your network too. So, the cost is about the same as a cheap computer monitor. And the boost in productivity will go on for many years to come.


Will it be disruptive? We can install new cabling in parallel to your existing network at night and on weekends. The switch-over is a weekend job too. Then we finish up by pulling out all of the old cable. That's called demolition. It might get a little dusty. But our team will do it's best to keep things as tidy as possible.


So, are you ready for 1gb Internet? If the service is available and you want a free on-site survey, contact us. We will be happy to come by and look at your office and prepare a Proposal for you at no charge and no obligation. If you aren't sure about the availability of 1gb Internet, contact us and we will find out for you.