Network Cabling, Data Cabling,cat5 cat6 cabling

The Advantages of Fiber Optic Cabling

7 Apr 2014

Fiber optic advantages Network Cabling, Data Cabling,cat5 cat6 cablingSophisticated technology has made it possible for the new generation of entrepreneurs to enjoy Cat5, Cat6, and fiber optic cabling. These technologies amplify speed, enhance performance and reduce costs.



Cat5


Cat5 refers to structured cabling for transmission of data signals. This is used primarily for computer networks. Standard performance is a maximum of 100 MHz and fits into the Gigabit and Fast Ethernet. Cat5 carries other signals for video and telephony. Almost all Cat5 cables are unprotected and depend on balanced lines and twisted pair designs as well as differential signals to reject noise.

Cat6


Cat6 is considered standard for Gigabit Ethernet along with network protocols that require more speed than Cat5 cables. Cat6 is made up of four pairs of wires comparable to Cat5. Using all four pairs allows this model to support communications that are double the speed of Cat5. This translates to speeds of one gigabit/second.

Fiber Optic Cabling


Fiber optic cabling or optical fiber is distinct from Cat5 and Cat6. It utilizes light rather than electricity to transmit signals. It has a better signal compared to the traditional copper cables, so it sends signals more rapidly than is possible with copper cable. Optical fiber is also impervious to interference from electricity, which means that users can use it anywhere and anytime. Fiber optic cabling also allows for much longer transmission distances. Cat5 and Cat6 are limited to only 100m of cable from wallplate to computer.

Even telephone companies have started to phase out copper wires in favor of fiber optic cables. Technical experts of these firms are working to reduce the vulnerability of fiber optic cables to water. Using fiber optic provides enterprises the adaptability of augmenting bandwidth in just several days compared to the conventional copper circuits, which usually take a maximum of one month to upgrade. Fiber optic connections generally start at two megabytes, with dedicated upload and download speeds of up to one gigabyte.

Fiber Connection


The fiber connection will also facilitate the business-mode Service Level Agreement or SLA. This implies that business entities obtain a secured 99.99 percent uptime. If power failure and other issues occur, technical specialists can conduct repairs within a maximum period of four hours. Your business reaps the benefits of speed, assured uptime and fast service by a reputable company like Progressive Office Cabling. It makes use of high-quality cables along with connectivity parts as well as the most efficient systems in cable management. The company’s technicians have been trained properly to be able to respond to your demands. With a proven project management approach, effective communication is guaranteed during the entire project.

This kind of service is practically unmatched in this industry. Savvy users and business proprietors will know how to choose the service provider that can deliver solutions based on their requirements.
Data Cabling, Fiber optic cable

About Fiber Optic Cabling

3 Apr 2014

Data Cabling, Fiber optic cableAn efficient cabling system is one of the prerequisites for a functional network and is considered to be an investment that will comply with your networking needs in the long term. Fiber optic cabling is the product of modern technology. This type of cabling conveys information from one location to another through pulses of light in an optical fiber. It is important for users to learn the advantages of fiber optics.


Fiber optic cables possess more bandwidth, or communications capacity, compared to metal and copper wires. This variety can transmit more information with greater reliability, which is one of the reasons for cable television and telephone providers to opt for fiber. The optical fiber also generates minimal power loss, thereby allowing longer transmission. Such cables are resistant against electromagnetic interference; they can operate in loud electrical environments because the interference does not have any effect on fiber cables.


Moreover, data moves at higher speeds since the fiber optic signal ensures that only a small amount of signal is lost in the course of transmission. Data is safe with fiber cables. It does not give off signals and is relatively hard to utilize. You will easily find out if the cable has been tapped or infringement has been made on the system, as this tampering causes the cable to give away light and causes the whole system to break down. Fiber optic cabling allows users to store electronics and hardware in a particular area rather than wiring cabinets with equipment.


Fiber optic cabling facilitates consistent transmission of data. The central part is fabricated from glass, an insulator, so that electricity cannot pass through. It is barely affected by ebb and flow of temperature, unlike copper, and can be immersed in water without any negative effects. Fiber optic is lightweight and thread like, but tougher than copper wiring. Specifications are a lot more than the copper cable. Although it is more difficult to terminate compared to copper, modern connectors make it easier to terminate.


The costs of fiber as well as other components are decreasing gradually but installation is more costly. Of course, fiber is more expensive than copper but it become more cost-effective in the long run due to less required maintenance, networking and downtime.


Practical users value their money. There may be certain downsides, such as installation expenses, but these are decreasing steadily each year. Fibers are also prone to damages because of the fine and smaller strands. Nevertheless, you can always institute safeguards that will address these points. Make it a point to determine the benefits of using fiber optic cabling.  Install the highest quality of optic fiber cabling that your financial resources will allow.

Data Cabling ,Cat5e ,Cat6/6a Cabling,Network Cable Rack

Should we upgrade to Cat6a or to Cat7 cabling?

10 Nov 2023


Cat6a is a much more established standard than Cat7. It is easier to install and has less connectivity issues. We are not going to recommend or bid on a Cat7 solution. Cat6a can run at speeds of up to 10-Gigabit so if that is acceptable for the next 10 years, than we recommend Cat 6a or go to fiber.

We were asked to bid on a cabling project that was fairly straight-forward. It involved replacing the existing Cat5e cable with either Cat6a, Cat7 or fiber cable. The site was an open, standard modern office with a drop ceiling and hollow office walls. The client needed 64 single drops to existing faceplates, three new 24-port patch panels and patch cables.


The need for higher speeds by the client was created by a demand for faster access to larger files from the Server. This potential client was involved with heavy drafting and multimedia applications that require more bandwidth through the cabling system. Cat5e yields up to 1000Base-T, 1-Gigabit, data transfer speed.


The challenge is in deciding on which type of cable to use. Cat6a and fiber are very standard solutions. But Cat7 is not  at all a standard installation yet (and might not ever be one). The problems with Cat7 are that the cable is very heavy,

Read More

Optical Fiber Cabling Usage and Methods

24 Apr 2009

Optical fiber is an effective medium for networking because it is flexible and can be bundled as cables. It is especially advantageous for long-distance network fiber-opticscommunications, because light propagates through the fiber with little attenuation compared to electrical cables. This allows long distances to be spanned with few or no repeaters. Additionally, the per-channel light signals propagating in the fiber can be easily modulated at 1 Gb/s.


Fiber cable saves space in cable ducts because a single fiber can carry much more data than a single standard data cable. Fiber is also immune to electrical interference; there is no cross-talk between signals in different cables and no pickup of environmental noise. Non-armored fiber cables do not conduct electricity, which makes fiber a good solution for protecting communications equipment located in high voltage environments such as power generation facilities, or metal communication structures prone to lightning strikes. They can also be used in environments where explosive fumes are present, without danger of ignition. Wiretapping is also more difficult compared to electrical connections, and there are concentric dual core fibers that are said to be tap-proof.


Both multi-mode and single-mode fibers are used in communications, with multi-mode fiber used mostly for shoOffice Cabling ,Network Cabling,fiber-optic-cablingrt distances, up to 550 m (600 yards), and single-mode fiber used for longer distance links. Because of the tighter tolerances required to couple light into and between single-mode fibers (core diameter about 10 micrometers), single-mode transmitters, receivers, amplifiers and other components are generally more expensive than multi-mode components.


quote-iconClick here to go to a page that will put you in touch with us. Answer all of the questions that you can and we will get back to you with a quote.