cable testing, Network Cabling ,Data Cabling ,cat6-cabling

Benefits of Copper Cabling Solutions

4 May 2014

cable testing, Network Cabling ,Data Cabling ,cat6-cablingThe conventional process of copper cabling has been used for several years and is still preferred by many network cable providers and end-users. Companies like Progressive Office Cabling offer a complete range of cabling solutions in Cat5, Cat5e, Cat6a and Cat6, providing clients with high-quality cable as well as connectivity components. Progressive Office Cabling makes use of highly effective cable management systems and well-trained technicians for installation jobs. It also employs a web-based online project management system to guarantee proper implementation and monitoring of any project.




How Does Copper Cabling Work?


Installation technicians have to follow specific policies and standards, particularly when it comes to building structure concerns. There are several steps to follow with regard to installation. First, the cable should have the appropriate covering or insulation, which is normally made of PVC, Plenum, Ultra-Violet, or mold-resistant varieties. The cable is cut according to the needed length, and outer covers are removed before connectors are attached. Use the appropriate stripping tools for this purpose. Cables should be mounted as orderly as possible.


There are instances when installers have to use ladder trays and J-hooks, which are made for network cabling, or shoot nails into concrete ceilings using a tool that literally propels nails like bullets into the concrete surfaces. Network cables must be installed away from electric power lines, fluorescent lamps and industrial machines; the risk of electrical coupling can increase dependent on proximity and voltage factors.



Different Benefits


Copper cabling has multiple benefits and is the most effective conductor out there. Copper cables are flexible, which is especially advantageous if you are using electrical wires. It is necessary to bend the wire during installation, so you need something durable that will not easily break after a lot of twisting. Copper does not easily melt, so even if a sudden surge of current or overload takes place, there is no risk of burning or melting. At the same time, copper is not difficult to work on. The majority of electricians opt for copper wires because they can be stripped easily or pulled through rigid spots.


With regard to structured copper cabling, there is the Power over Ethernet benefit. This means that it is possible to run power through devices such as Wireless Access Points, surveillance cameras, and power phones. There is an emergency power supply that continues to power mission-critical devices even if electrical power conks out. Copper cabling supports modern technologies and facilitates the convergence of different applications. Hence, it is important that copper cabling is optimized for your requirements. That is why you should make sure to get the services only of experienced and trustworthy providers in the industry. Choose the provider that ensures customer satisfaction and warranty after installation.

Network Cabling ,cat5 cat6 cabling

How Does Structured Cabling Work?

10 Nov 2023

CablingNetwork Cabling, Data Cabling,cat5 cat6 cabling is an essential component in your network. It also has a long life span, from 15 to 20 years, so it may be necessary to replace your network equipment at least three times during the life of the cabling configuration. Cable installation is roughly 15 percent of the total network outlay. So it is advisable to invest in premium cabling systems, particularly to reduce maintenance costs and downtime while also achieving improved network performance. Entrepreneurs are always advised to look at the long-term scenario and acquire the best cable installation available.



Uninterrupted Flow of Information


There is no doubt regarding the importance of a structured cabling system in the operations of a business organization. This complete system with related hardware provides far-reaching telecommunications; it has a broad range of uses like supplying phone services or transmitting information through a network of computers. Each structured cabling system is unique depending on a number of factors, including the architectural formation of edifices that houses cabling installation, cable and connection components, equipment variety that cabling supports, configuration including upgrades and retro-fitting, requirements of clients, and manufacturers’ warranties.


The assembly that has been planned carefully and installed according to this plan ensures an unbroken network of information and communications. Aside from this advantage, structured cabling facilitates sharing of resources, enables smooth operations, and adapts to evolving technology. In fact, it is expected to last longer than computer servers and network switches. The types of network installations are the Local Area Network (LAN), Metropolitan Area Network (MAN) and Wide Area Network (WAN).


Cabling installation firms design and install LAN systems consisting of data and voice as well as support equipment for computer networks and mainframe programs of PCs. All installations must comply with state and city codes together with manufacturers’ specifications.



Other Benefits


Structured cabling offers users more flexibility. It takes the place of multiple wiring systems with a single and cohesive infrastructure. This conveys data in various formats ranging from voice to video. You only need to plug the correct adapter into the socket whether you want to connect a computer, telephone or fax machine.


It affords users peace of mind since each cabling comes with full on-site warranty, covering component or performance faults. It is also possible to make changes in a matter of minutes. This built-in ensures that your organization can be very cost-effective. Furthermore, structured cabling has the capacity to hold high bandwidth, guaranteeing that you've invested in a solution that fully supports new applications. In other words, your cabling infrastructure will not become obsolete within the next few years.


Take care to deal only with cabling companies that employ highly competent technicians and make use of superior cable management equipment.

Data Cabling, Fiber optic cable

About Fiber Optic Cabling

3 Apr 2014

Data Cabling, Fiber optic cableAn efficient cabling system is one of the prerequisites for a functional network and is considered to be an investment that will comply with your networking needs in the long term. Fiber optic cabling is the product of modern technology. This type of cabling conveys information from one location to another through pulses of light in an optical fiber. It is important for users to learn the advantages of fiber optics.


Fiber optic cables possess more bandwidth, or communications capacity, compared to metal and copper wires. This variety can transmit more information with greater reliability, which is one of the reasons for cable television and telephone providers to opt for fiber. The optical fiber also generates minimal power loss, thereby allowing longer transmission. Such cables are resistant against electromagnetic interference; they can operate in loud electrical environments because the interference does not have any effect on fiber cables.


Moreover, data moves at higher speeds since the fiber optic signal ensures that only a small amount of signal is lost in the course of transmission. Data is safe with fiber cables. It does not give off signals and is relatively hard to utilize. You will easily find out if the cable has been tapped or infringement has been made on the system, as this tampering causes the cable to give away light and causes the whole system to break down. Fiber optic cabling allows users to store electronics and hardware in a particular area rather than wiring cabinets with equipment.


Fiber optic cabling facilitates consistent transmission of data. The central part is fabricated from glass, an insulator, so that electricity cannot pass through. It is barely affected by ebb and flow of temperature, unlike copper, and can be immersed in water without any negative effects. Fiber optic is lightweight and thread like, but tougher than copper wiring. Specifications are a lot more than the copper cable. Although it is more difficult to terminate compared to copper, modern connectors make it easier to terminate.


The costs of fiber as well as other components are decreasing gradually but installation is more costly. Of course, fiber is more expensive than copper but it become more cost-effective in the long run due to less required maintenance, networking and downtime.


Practical users value their money. There may be certain downsides, such as installation expenses, but these are decreasing steadily each year. Fibers are also prone to damages because of the fine and smaller strands. Nevertheless, you can always institute safeguards that will address these points. Make it a point to determine the benefits of using fiber optic cabling.  Install the highest quality of optic fiber cabling that your financial resources will allow.

Data Cabling Cat5e Cat6/6a Cabling

Abandoned Cable Liability Issue

17 Oct 2013
Cabling,Data Cabling Cat5e Cat6/6a Cabling

As tenants come and go in a commercial building, the cabling infrastructure sometimes leaves behind abandoned Cat5, Cat6 and coax cabling. All that needs to happen is for the new tenant to request a reconfigured layout that relocates the main wall closet. Or, sometimes the old tenant will cut away the cabling in order to take the patch panels with them. If possible, keep the wall closet location. And always offer to buy the patch panels from a departing tenant.



Read More

Washington DC,Network Cabling, Data Cabling

Network Cabling Issues

31 Mar 2013
Network Cabling, Data Cabling ,Washington DCA major part of creating a viable network involves the installation of a cabling system. A solid cabling system is a good investment that will not only meet your current networking needs, but will last through your next-generation network as well.

Modern Ethernet networks follow a “star topology”, where each device on the network connects its own cable to a hub. In a single room
Read More
IT support, network infrastructure

What is “Structured Cabling”?

27 Dec 2012

data cabling,structured network cables Traditionally computer network designers developed their systems with the assumption that they will operate on a specific type of cable using a specific type of connector. Thus, each manufacturer has its own cable and connector "standard," but that standard was for their own system only. For example, here are some “standard” cable/connector systems in use:

Read More

Cat5e, Cat6/6a Cabling ,Structured Cabling

Do Not Use Basket Tray against a Tight Ceiling

8 Aug 2012

When a new office design is in its initial stages, it is critical to consider proper handling of utilities, power water and cabling inside the walls and ceiling. For cabling, it is necessary to use hooks to hold the cables above the drop ceiling. When the installation of cable involves large numbers of cables traversing lengthy expanses, it is normal to install cable ladder trays up in the ceiling to carry the bulk of the cable along the main corridors of the office. Cable ladders vary in quality and cable handling capabilities. The amount of cable and the budget of the project will determine the type of cable ladder that will be built.


A higher quality cable ladder will, in the long run, save time and money during the installation phase of a cabling project. The alternative to a cable tray is to install cable conduit. Considerations in choosing to use a cable ladder tray system include the following:

Read More

Data Cabling, Cat5e, Cat6/6a Cabling

US Court of Appeals Veterans Affairs – Cabling Project Notes

18 Jun 2012

Project Objectives (Do not call, this project has been COMPLETED)




Number of Drops: 360 (140 duals, and 20 quads)

Ceiling: Non-plenum, separate ducting

Racks: Enclosed, 19”, will already be installed by customer

Switches: Provided by customer, 48 port

Patch cables: None necessary. They will provide patch cables from wall plate to computers and from patch panels to switches.

Labeling and documentation of all cabling is important. How this looks is important to them. Please provide a spreadsheet of all wallplates and rooms.

  • Location is behind elevators.

  • All workstation runs will terminate in wiring closet behind elevators.

  • We will mount patch panels in this closet on the wall. Use 24port, Cat5e, patch panels.

  • They will mount racks for switches.

  • 4 pairs of fiber will run from the closet to the server room on the same floor. We are to provide the cabling plant for the fiber.


Office Cabling Network Cabling

Server Room:




  • 2, 24 port patch panels per rack.

  • Cabling plant for fiber to switch closet.


Existing server room


Click HereThey want cable management hardware to be part of the solution. What you see in this room is what they’re cleaning up and looking to make high end and professional in the new location. Photos here include existing fiber. Note the ceiling cable management rack. In the new location these will be in place in the server room and along the ceiling in the main hallways.


New server space - Roughed in area they’re moving to.




 

 

 

 

 

 

 

 


General Floor Space:



  • Quad drops in each office and cube in the technology area

  • Dual drops in all other offices

  • 6 drops for cable t.v.

  • Wall facing outside is already dry walled and insulated


Part of that wall has large window with wall space under it. Customer is unsure if drops will go there or anywhere along that outside wall.

Includes the outside wall. They’re not sure if there will be drops along this wall. If so it’ll be interesting because of the insulation. Also note that they MAY want drops under the windows along this wall.

There are some pictures of the ceiling details. Also note that the client will already have cabling runners ceiling mounted down the middle of the two main hallways to the server room.








Special Fiber Optic Line Item Bid:


US Court of Appeals wants this as a line item so they can choose to add this work or not when they’re doing the budget.

Fiber runs between floors. The floor plan represents the 6th floor. 14 runs broken out as follows. A single 6-strand fiber cable will be run from the 6th to each floor in the table below. Three strands will be connected and three will be left as spares.



























# of Runs Floor
3 11th
3 10th
3 9th
3 2nd
2 Mezzanine

12’ ceilings, concrete floors.

Conduit already exists between the floors. We have to repack the conduit we use with fire stop putty to meet fire code. See photos of the “Switch closet” for conduit images.