Structured Cabling,,Office Cabling.connectors
Written by Stu Kushner

How Improper Cabling Causes Network Issues – Part 2

Structured Cabling Office Cabling Atlanta GAAs discussed in Part 1, the performance issues of your company’s network may be directly related to improper cabling. Part 2 will discuss Compatibility, Patch Cords, and Poor Installation.

Compatibility

Issues occasionally arise when coupling cabling and connectivity from various manufacturers. The use of jacks from one manufacturer with cabling from another, and then patch panels from a third firm is an example. This combination may result in compatibility problems. When components that are not intended by design to function together are used, network performance issues will likely result.

Purchasing top of the line high-performance cables, while utilizing lower-quality connectivity components, will produce a weak link in the chain. Cable of the highest quality will be unable to attain its full performance potential when it is married to jacks, patch panels, and plugs that are not rated to support its capabilities.

Patch Cords

Patch cords may be the top reason why there are issues in network performance.

Your company may have installed a high performance cabling infrastructure of the highest quality, but if low-quality patch cords were purchased to economize, network speed, signal quality, and overall performance will be compromised.

Poor Installation

Vetting the cabling services team you hire is perhaps the most important factor in the prevention of network performance issues. Check that the company you are considering has technicians that are properly trained and certified to install the cabling system you have chosen.

When cable installers are not properly trained, it will greatly increase the probability that your company’s structured cabling system will not be properly installed. Incompetent installation can result in problems such as improper pulling, excessive bending, and cable being installed too near sources of signal interference like large motors and machinery.

Poorly trained technicians will leave cabling that is not properly terminated or correctly polished. Sloppy work and insufficient attention to detail during installation will usually result in poor network performance, along with costly and time-consuming efforts to address the problems the substandard work caused.

Progressive Office Cabling

Founded in 1986, Progressive Office’s success has been a direct result of years of commitment to seeking solutions on behalf of our clients in the Washington, D.C. and New York City areas. Efficiently working together, Progressive teams get cabling installed and operating as fast as possible while minimizing disruption and downtime. Call our toll free number (800) 614-4560 today.

About Stu Kushner

Born and raised in Silver Spring, MD. Stu Kushner began his career at Boeing Commercial Aircraft and then on to Hexcel and Case/Rixon where he specialized in CAD/CAM (computer design and robotics). In 1986, he started Progressive Office. The earliest years were about networking small businesses and providing IT support. But since 2008, the company has concentrated exclusively on providing office network cabling solutions.

Translate »